GT-H60 reaches over 30 MPa compressive strength within 24 hours, enabling rapid equipment installation and commissioning to cut project downtime. Controlled 0.15% 3-hour micro-expansion fully offsets curing shrinkage, leaving no gaps between grout and machine base to prevent uneven load transfer. Its ultra-high 320–340mm fluidity flows freely without vibration to fill every tiny cavity, delivering fully dense, solid anchorage for compressors, turbines and heavy steel column bolts with long-term stable bearing performance.
Versatile GT-H60 fits all heavy-duty construction scenarios: structural beam & column enlargement, honeycomb concrete patching, post-tension bridge duct grouting, and rapid repair of highway/bridge expansion joints. It boasts outstanding anti-freeze, anti-permeability and oil-resistant properties to withstand harsh outdoor and factory environments, resisting long-term erosion and structural degradation. Factory pre-blended formula removes the risk of uneven manual mixing, ensuring consistent high strength and expansion performance for every structural repair project.
Single-component ready-to-use powder only requires clean water for mixing, eliminating complicated raw material preparation on site. Slurry must be poured within 30 minutes for maximum flowability, and simple formwork setup enables continuous one-step pouring without interruption. After placement, basic moisture covering curing for 7 days is all that’s needed. Non-toxic, non-flammable composition ensures safe indoor and outdoor construction. Lower labor costs, shorter construction cycles and minimal future maintenance make GT-H60 the cost-effective premium grout choice for contractors and industrial facilities.
If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.
